|
RF Repeater
|
Indoor Band-
Selective Repeater
|
Frequency Shifting
Repeater |
Fiber Optic Repeater
|
Our repeaters have been widely used in 300 cities in China and over 30 countries in South East Asia, Africa, South America and Middle East. Complemented with a state-of-the-art Network Management System (NMS) lets you remotely manage the field devices at comfort from your OMC. With the right multinational partner on our side, we believe that our repeaters can answer most of the network optimizing necessities.
Top Mounted Amplifier (TMA)
Our GSM/CDMA Duplex Tower Mounted Amplifiers (TMA) is designed to expand BTS signal coverage through enhancing the uplink receiving sensitivity in the area where call drops and handoff failures happen frequently. The Duplex TMA is installed on the top of telecommunication tower to amplify the mobile signal via a Low Noise Amplifiers (LNA) before the signal transmitted to the BTS.
Tower Mounted Booster (TMB)
Our GSM/CDMA Duplex Tower Mounted Boosters (TMB) is designed to expand uplink and downlink signal coverage together. The TMB uses Duplexer with good isolation which deletes unnecessary signal and has small input loss. Compared with TMA which only improve receive path of downlink, the TMB can improve both uplink and downlink through adding Power Amplifier, the TMB also has bypass mode on the equipment structure, which can prevent the service from interrupting when something happens. The TMB utilizes Duplexer, Power Amplifier, Low Noise Amplifier, Bypass Mode Switch, PDU Unit, and other components.
Broadband Wireless Access
| Medium Power System
16kW
GFE cabinet
|
Medium Power System
16kW
ETS cabinet
|
High Power System
32kW
ETS cabinet
|
High Power System
48kW
ETS cabinet
|
A full range of DC power systems provide reliable operation of the telecommunication and data transmission networks. The modular design makes the power systems applicable for the different local requirements in a global communication market
Our solar panels achieve higher power output because single-crystalline silicon technology that offers better efficiency than multi-crystalline or amorphous silicon and other thin film technologies, is preferred.
The silicon cells are wired together in two strings and are each protected by a bypass diode against damage through hot spots. The module protects the solar cells against moisture, gives UV Stability and allows for thermal expansion. The front covering is made of top quality tampered solar glazing. The solar glazing and the solar cell laminate are joined together into a unit and mounted in a torsion resistant frame, made of anodized aluminum. Solar panels are manufactured in Singapore in adherence to stringent quality standards.
